The benefits of using spray foam insulation machines, such as their durability and energy savings, make them an attractive option for homeowners and contractors. Getting the job done right depends on the appropriate equipment, as there’s more behind the process than a simple spray gun. When searching for a spray foam insulation machine for sale, it’s important to recognize the different types of equipment and their respective uses.
Continue reading
Author Archive: Dave Penta
How to Start a Spray Foam Insulation Business?
So, you’ve come to recognize the versatility and popularity of spray polyurethane foam and have decided to capitalize on the growing trend by creating a spray foam business start-up? Since spray foam has a variety of uses and fits across a wide range of industries, it may seem overwhelming when deciding where to begin. Construction and renovation are one of the most common markets for spray foam, as it is gaining traction in both new buildings and retrofitting.
How Does the Logan Manifold Work
How to Changeover Material Using the Logan Manifold
Below are instructions on how to changeover material from Open Cell (OC) to Closed Cell (CC) or from Closed Cell to Open Cell, using the Logan Manifold. Changeover only takes about 10 minutes, once the Logan Manifold is set up, and material waste is minimal at only eight ounces.
Continue reading
The Problem with Changing Material from Open Cell to Closed Cell
SprayWorks frequently gets calls from contractors with issues related to transitioning their spray foam equipment from one B-side material to another. We recently decided to take action and launched a new product, the Logan Manifold, to help applicators easily transfer material from Open Cell to Closed Cell or from Closed Cell to Open Cell.
Continue reading
How to Minimize SPF Material Waste
Spray polyurethane foam material is one of the ongoing expenses you’ll have as an equipment and business owner. That means it’s one of the biggest areas in your business that you can cut costs by reducing waste when storing or spraying SPF material. Use the following four tips to effectively minimize SPF material waste in your spray foam insulation business.
Continue reading
Reduce Pocketing in Studs
There are different ways to spray Open Cell foam to eliminate pocketing when spraying studs. Depending on the manufacturer you are using, they will recommend vertical or horizontal spray techniques – because of the chemical compound and how it settles in. For example; Rhino Linings recommends spraying horizontally with their Thermal Guard Open Cell. In doing so, I can improve my overall spray quality and deliver a better end-product.
Proper hose care
When heating up your hose, I highly recommend unravelling the bulk of it. There are two reasons why.
One – the hose will create hot spots and could potentially get to the point where the hose would melt and burst open after an extended period of time. The second reason – as you spray material, you’ll get inconsistent heat and as your material cures, your application will become poor and inconsistent.
Spray Gun Safety
Every gun has a safety feature. You should get in the habit of turning on the safety feature whenever you stop spraying – whether it’s to talk to someone or check your depth. It’s an often overlooked step when a new applicator is learning, but can quickly cause serious injury or damage if the spray gun releases unmanaged chemical.
Check your A Filter
I make it a habit to check my A Filter before I start every morning. To me, that’s the only way I can pressurize the machine and accurately read gauges to eliminate any problems. The reason I check the A Filter in the morning is, regardless of when the gun is cleaned the previous day, the cleaner tends to leave a layer of film on the screen.
Keep Your B-Side Going
The B Side, in general, is less likely to cause contamination in the screens. As a result, B Side screens are often neglected.
One possible cause of B Side pressure loss is the collection of paint chips over time. Spray foam drums are recyclable and during the recycling process, some of the drums are repainted inside. Over time, the B component can soften the paint in the drum, causing it to flake off and collect in the Y-filter assembly – restricting flow to the machine. Making the Y-filter assembly a priority to clean can help prevent the collection of paint chips.