Author Archive: SprayWorks

Spray Foam Equipment Distributor Invents New Product

Posted on by

SprayWorks Equipment Group Releases Dual Drum Heating System

Dual Barrel Blazer

Dual Barrel Blazer drum heater for up to 55 gallon drums.

Canton, OH – November 1, 2016 – SprayWorks Equipment Group, an Ohio-based PMC equipment distributor and manufacturer of the Barrel Blazer and Spraybot, has released a new drum heater – the Dual Barrel Blazer. Previously only available as a single drum heating unit, the Dual Barrel Blazer allows contractors to heat full size 55 gallon drums side-by-side – whether in a mobile rig or inside a building – and can be used in conjunction with barrel blankets for optimal warmth.
Continue reading→

Polyurethane Machinery Corporation Awards SprayWorks for Being Top Distributor

Posted on by
PMC Award

Mike Kolibas, President of PMC, presents award to Jennifer Davidson, Director of Digital Marketing at SprayWorks.

Canton, OH September 27, 2016 –SprayWorks Equipment Group proudly accepted the award, from Polyurethane Machinery Corporation (PMC), as the top PMC distributor in 2015. SprayWorks has been a distributor for PMC polyurethane products since 2008.

SprayWorks’ team has nearly 100 years of combined experience in the spray foam and coatings industries. They chose to distribute PMC products for the last eight years because of the quality, price, ease of operation, and ease of maintenance that PMC products offers. SprayWorks has been impressed with the support provided by PMC and felt PMC’s values aligned with its own – which is why they continue to distribute PMC products.
Continue reading→

Come Visit Us at the ICAA Convention and Tradeshow

Posted on by

Insulation Contractors Association of America is taking over Denver

ICAA logoSprayWorks is heading to Denver, Colorado! From Wednesday, September 28 through Saturday, October 1, 2016 – SprayWorks is attending the ICAA Convention and Tradeshow. We will be exhibiting at booth #304 in the Denver Marriott City Center on Thursday, September 29 from 4:30 pm until 7:30 pm and Friday, September 30 from 11:00 am until 3:00 pm. Our exhibit booth will feature some of the PMC equipment we offer, along with some featured SprayWorks equipment. Tradeshow attendees will have access to tradeshow only specials for some of our top equipment and parts.
Continue reading→

Changing the Temperature Sensing Unit on Heated Hose

Posted on by

EL-51A-4-2TThe equipment used today for spraying plural component urethane foam and coatings provide the means to preheat the A and R chemicals, pressurize the chemical to the manufacturer’s recommended PSI and deliver that conditioned and heated chemical to the gun via a heated hose. Most units today utilize a system which provides automatic hose heat. The proportioners are equipped with a controller which receives a signal from a temperature sensing unit. The signal indicates the temperature of the chemical in the hose from a remote distance from the proportioner and ideally just before the gun.

Continue reading→

Spray Foam Convention & Expo – Meet us!

Posted on by

Check out the latest spray foam insulation equipment

SPFA 2016

Visit our booth #708 at the 2016 Spray Foam Convention and Expo

From February 8-11, 2016, SprayWorks Equipment Group will be attending the Spray Foam Convention & Expo. Our booth will be open to view some of our latest spray foam insulation equipment and polyurethane foam insulation equipment. No appointments needed!

During the show, SprayWorks will be featuring and demonstrating the Spraybot Ultra – an automated spray robot for spray foam insulation and other polyurethane application. The Spraybot is compatible with most spray guns including; PMC, Graco, Gusmer and others!

Continue reading→

Attention Contractors! Unique Barrel Heater

Posted on by

Barrel BlazerIntroducing the Barrel Blazer, a unique game-changer that will deliver magic for contractors far and wide. At SprayWorks, we are always looking out for contractors, searching for ways to help you improve cost in the manufacturing and processing of spray foam and coating materials. It’s our pleasure to introduce the Barrel Blazer. During fall and winter, the most common tech calls are directly due to weather conditions. When material gets cold in the dead of winter, it begins to thicken in viscosity. This begins a slippery slope, no pun intended. But when contractors attempt to process cold material, it creates a domino effect of malfunction. First, the transfer pump may fail to deliver material to the machine at the appropriate time or rate, then the machines goes off ration causing pressure sensors to shut down the machine. Next, error codes may arise, the spray gun may cross over and applicators spray a bad shot of material. During this debacle, the clock is ticking, but no production is taking place which means you may be losing money too. Depending on the particular projects contractors may be working on, it could have serious ramifications to meeting project delivery deadlines. The Barrel Blazer is an ideal alternative to an insulation blanket.
Continue reading→

SprayWorks Equipment Group Launches New Website

Posted on by

Canton, OH October 19, 2015 – SprayWorks Equipment Group recently launched a revamped website at www.SprayWorksEquipment.com. Boasting clean and easy design, and in addition to their recently launched online store, this website will allow visitors to quickly navigate through products, industry information, and training.

SprayWorks’ new online spray foam training offers free training for those looking for an introductory session of spray foam with full lessons, individual logins, and quizzes – scoring each trainee individually.

Continue reading→

SprayWorks Launches New Website

Posted on by

We understand your need for efficient and quality information. In order to better serve our customers and provide easier navigation, we recently launched our new website! It has all the benefits of the old website, but with several new upgrades. To help you navigate more quickly, we’ve summarized some of our primary sections. We hope you find our website beneficial to your spray foam and coatings equipment needs.

  • Easy viewing and navigate a summary of our products and services. Click here!
  • Educate your team on the basics of spray foam with our Spray Foam School. The new school now includes; quizzes, high quality graphics, and more! SprayWorks’ new online spray foam training offers free training for those looking for an introductory session of spray foam with full lessons, individual logins, and quizzes – scoring each trainee individually.
  • Access industry knowledge and information from trusted professionals. The new Tips from the Experts and Frequently Asked Questions sections display industry insider tips from SprayWorks’ certified experts and give you the opportunity to get time tested advice from our experts.

Continue reading→

SprayWorks Equipment Group Donates $5,000 for Wounded Warrior Project™

Posted on by

Canton, OH September, 1, 2015 – SprayWorks Equipment Group successfully reached its goal – to donate $5,000 to Wounded Warrior Project, and raising awareness of the veterans who work in the spray foam and coatings industry. All proceeds from Warriors We Love were donated to the nonprofit organization Wounded Warrior Project™ (WWP), and will support a full range of programs and services for this generation of injured veterans and their families. Supporters of the campaign included Polymac Machinery Corporation (PMC).
Continue reading→

SprayWorks Equipment Group to host Warriors We Love fundraiser supporting wounded service members through Wounded Warrior Project™

Posted on by

Canton, OH August, 1, 2015 – SprayWorks Equipment Group announced today plans to donate funds to assist service members who have been injured in the line of duty. All proceeds from Warriors We Love will be donated to the nonprofit organization Wounded Warrior Project™ (WWP), and will support a full range of programs and services for this generation of injured veterans and their families.
Continue reading→