fbpx

Changing the Temperature Sensing Unit on Heated Hose

by | Apr 6, 2016 | Hoses

EL-51A-4-2TThe equipment used today for spraying plural component urethane foam and coatings provide the means to preheat the A and R chemicals, pressurize the chemical to the manufacturer’s recommended PSI and deliver that conditioned and heated chemical to the gun via a heated hose. Most units today utilize a system which provides automatic hose heat. The proportioners are equipped with a controller which receives a signal from a temperature sensing unit. The signal indicates the temperature of the chemical in the hose from a remote distance from the proportioner and ideally just before the gun.

These sensing units are better known as TSU, FTS or RTD. These sensing units are installed on the hose and in most cases are very close to the gun. Since the hoses are dragged over obstacles, dropped and go through rough use, the sensing units will break and must be replaced. Some equipment manufacturers provide a sensing unit that is one piece and requires that all the hoses be disconnected to replace the unit. This is time consuming, costly and messy. PMC offers a Slim Line TSU housing that allows for the thermocouple to be replaced WITHOUT removing the hoses. When replacing a PMC thermocouple it is recommended that you place the TSU on a bucket as shown below, which will prevent chemical from leaking on the floor.

  1. Bleed down the pressure on your system
  2. Unplug the TC or RTD harness
  3. Remove the old Thermocouple and insert a replacement
  4. Tighten the fitting, reconnect the harness, bleed the system and you are ready to spray.

Replace TSU by PMC

Founded in 2007 on the principle of โ€œdesigned with the customer in mindโ€, PMC targets engineers with a complete product line for urethane spray systems including but not limited to proportioning units, a uniquely designed heated hose system, transfer pumps, spray guns and the auxiliary equipment required by a contractor to successfully and economically apply residential foam insulation, roofing, pour foam, Polyurea and Polyurea hybrid coatings. Manufactured in the USA, all of PMCโ€™s products are the direct result of customer input, innovation, creativity and the perfectionist spirit of its engineers. PMC’s full line of equipment is available at http://store.sprayworksequipment.com

Written by: <a href="https://sprayworksequipment.com/blog/author/sprayworks/" target="_self">SprayWorks Equipment</a>

Written by: SprayWorks Equipment

SprayWorks Equipment is an equipment supply company at the center of polyurethanes and the polyurea industry. Our team has certified experts, trained to help a variety of businesses in single and plural component applications. With well over 100 years of combined spray foam, polyurea, and construction experience in a variety of industries, SprayWorks Equipmentโ€™s team brings a wealth of knowledge to our customers.

CONTACT SPRAYWORKS

Fill out my online form.

Recent Blog Posts

Sign Up for SprayWorks Training

Get Training for Yourself or Your Entire Team Whether Youโ€™re Nearby or Far Away

Contact Us
View Training Programs