In this episode of Fix-It Friday! We teach you how to instal a Temperature Sensing Unit (TSU) on your PMC Heated Hose. An insulated jacket is included with your TSU compatible hose – you’ll want to ensure it is over the hose and in place before installing the TSU, as you cannot add it after the TSU is in place.
Attaching the TSU to your Hose
The TSU comes installed as one piece and is ready to add to your hose – also the sensor is replaceable. PMC installs their TSU on the “A” side of your hose, also the air will run through the block. Run your sensor up the line towards the gun and way from the machine with a standard wrench and tighten. The purple line of your connecting hose should attach to the TSU as well and will communicate the hose temperature to the machine.
Placing your TSU:
Commercial Roofing – for roofing the TSU should be placed approximately 50% of the hose length or at least the first 150 feet.
Insulation and Coatings – for insulation and coatings, the TSU should be installed as close to the gun as possible – typically connected to the whip hose.
