As a general rule, the shaft area of your Graco T3 Pump should be checked, cleaned and lubricated every three to six months. When you get a new T3 Pump and during these checks, run about 20 gallons of material. Afterwards, tighten the packing nut by hand and then use the included spanner wrench to tighten an additional 1/8 to 1/4 turn.
Graco T3 Transfer Pump Packing
Written by: Dave Penta
Dave Penta is the VP of Sales at SprayWorks Equipment. For the past 40+ years, Dave has worked with multiple industries including; commercial and residential buildings, along with spray foam and coatings systems.
CONTACT SPRAYWORKS
Fill out my online form.
Recent Blog Posts
Sign Up for SprayWorks Training
Get Training for Yourself or Your Entire Team Whether You’re Nearby or Far Away