fbpx

PMC Proportioner Technical Service Bulletin

by | Apr 18, 2023 | PMC PH(X)2, PMC PH(X)25, PMC PH(X)40, PMC PH55, PMC PHD(X)2, PMC PK-25, PMC Premier, Rig Support

The new Autonics controllers are a slightly different look for proportioners PMC built in 2023 and beyond. 
the Set Point will still be on the Right-hand side and the system temperature will be on the Left. You will still raise and lower the Set Points with arrows as before and, if you need to use the Manual Hose Heat function, you just push the MODE button and, you will see a H pop up then, using the up arrow increase the power percentage value as needed. 

Also to be noted is that the Part Numbers for the controllers will continue to stay the same: A&B PN#201154, Hose PN#201155. 

Written by: <a href="https://sprayworksequipment.com/blog/author/sprayworks/" target="_self">SprayWorks Equipment</a>

Written by: SprayWorks Equipment

SprayWorks Equipment is an equipment supply company at the center of polyurethanes and the polyurea industry. Our team has certified experts, trained to help a variety of businesses in single and plural component applications. With well over 100 years of combined spray foam, polyurea, and construction experience in a variety of industries, SprayWorks Equipment’s team brings a wealth of knowledge to our customers.

CONTACT SPRAYWORKS

Fill out my online form.

Recent Blog Posts

Sign Up for SprayWorks Training

Get Training for Yourself or Your Entire Team Whether You’re Nearby or Far Away

Contact Us
View Training Programs