Choosing And Buying Spray Foam Machines

It is never an easy task to choose and buy Foam Insulation Machine for sale. SprayWorks Equipment is an ideal company for foam machine proportioners and reactors. Go through the list of machines available and then choose from top-quality manufactured products. The most reputable company ensures the best quality equipment for clients that help ones business to grow.

Machine type

Both the hydraulic and air-driven insulation machines are on sale and our products and can be used for a variety of jobs and a varied range of applications. It is essential for successful application of spray foam or polyurea coatings to choose the right proportioner for the job. If you wish to determine the Spray Foam Machines’ suitability, it is imperative to understand the variables. These include:

  • Pump Drive System
  • Output
  • Pressure Rating
  • Heating Capacity
  • Electrical System

Understanding the operations

A classic series of proportioners that use opposed piston pumps with an air-driven system. Air-driven machines with lower-output, ranging between 25- 30lbs. /min and a 3,000 psi whereas Hydraulic spray foam machines offer higher outputs of max at up to 50 lbs. /min 3,500 psi. The air-driven machines cater to individual contractors and start-ups for smaller footprint and are cost effective. The hydraulic machines can handle larger projects like commercial jobs – air-driven proportioners, bridges, roads of high value and best performance.

Processing the chemicals

The chemicals have to be processed at 110°F-140°F for spray foam and 140°F-160°F for coatings with accurate pumping and mixing. The machine with a strong heating system keeps up with the output. Hydraulic machines go up to 20 KW Air-driven proportioners have heating wattages between 6-15 kW. In case of Spray Foam Machines, the air-driven machines need access to an air compressor whereas hydraulic machines require electrical connection to power the drive pump.

How a Spray Foam Machine Works

A Coating Machine and Hydraulic Spray Foam Needs 5 Key Elements to Function

  • Air Supply, 100 PSI at 17cfm
  • 220V/240V Single Phase or Three Phase Power Supply
  • Spray Gun AP-1 air purge gun is used.
  • Heated Hose gets power from a transformer located at the base of the machine.
  • Transfer Pumps powered by air

Knowing about the manufacturer

There are companies whose products are of the topmost quality standards, like PMC and Graco. It requires low maintenance, are easy to repair, and have low operational costs. It gives necessary attention to our customer needs. The top companies supply technology and expertise for the management of fluids and coatings in both industrial and commercial applications. It designs and manufactures products for the markets. Other than that, there are systems and equipment to move, dispense, measure, control along with spray powder materials and fluid.

SprayWorks Equipment Group is a spray foam and polyurea company; supplying equipment, training, material, mobile rigs, and parts – and a distributor for PMC, Graco, and Gusmer equipment. With nearly 100 years of combined experience, SprayWorks has knowledge in commercial and residential buildings, bridges, and infrastructure. SprayWorks provides training and education for new contractors and equipment operators; open cell, closed cell, polyurea & coating applications for interior & exterior building envelope design, waterproofing, below grade, bridge deck, barge, secondary containment all types of roofs and structures.