New TSU Product Review

The new temperature sensor unit (TSU) from PMC is a unique design that makes replacement cost and effective one. The universal design fits all heated hose assemblies. PMCs TSU unit is designed to allow the user to replace only the TSU probe without having the hassle of disconnecting spray hoses.

The lead TSU external wires are sleeved with a coiled jacket that protects the probe wires from excessive wear and tear. With the PMC TSU unit you will not need to replace the whole assembly or force to buy a fitting you don’t need. Simply replace the probe at a fraction of the cost. Most temperature sensing units are not serviceable and can cost in excess of $600 to replace.

Trouble shooting your existing TSU is a breeze.

EL-51A-4-1Start by checking the TSU unit with and ohms meter across the plug pins. Pins 1 & 2 should read approximately 10 ohms. Pins 1 & 3 should read infinity. Pin 3 to TSU ground should read 0 ohms.

Pin 1 to Iso fitting should read infinity. If your TSU fails any test you will need to replace the unit. Note: Whenever replacing your TSU – (FTS) Fluid Temperature Sensor unit always refer to the manufactures maintenance and repair manuals for proper procedure.

Learn more about PMC Spray foam and polyurea equipment. (See proportioners, manuals and other spray foam machines). Made in the USA, “Designed with the customer in mind” and backed with a manufacture warranty.

Tagged , , , .

Dave Penta is the VP of Sales at SprayWorks Equipment Group. For the past 30+ years, Dave has worked with multiple industries including; commercial and residential buildings, along with spray foam and coatings systems.

22 Comments

  1. It is a good post. This website is loaded with lots of useful things, it helped me in many ways.

  2. Thank you for the blog, it truly is filled with so much useful information. This helped me a lot.

  3. Many thanks for helping people find the information they need. Great stuff as always. Keep up the great work!!!

    • It’s good that the last design is suitable for almost all previous versions and we will not have any difficulties with its replacement.

  4. Many thanks for helping people find the information they need. Good stuff as usual. Keep up the good work!!!

  5. This is a very good tip particularly to those new to the blogosphere.

    Short but very accurate information… Thank you for sharing this one.

    A must read post!

  6. I am in fact pleased to read this web site posts which consists of lots of valuable information, thanks for providing such information.

  7. Wow,Fantastic article,it’s so helpful to me,and your blog is very good, I’ve learned a lot from your blog here,Keep on going,my friend,I will keep an eye on it,One more thing,thanks for your post!

  8. Hi there, You have done a great job. I’ll certainly digg it and personally
    suggest to my friends. I’m confident they will be
    benefited from this website.

  9. After going over a few of the blog posts on your site, I honestly appreciate your way
    of blogging. I bookmarked it to my bookmark site list
    and will be checking back in the near future. Please check out my website
    as well and tell me what you think.

    • Thanks for following our blog! We always hope to provide the polyurethane community with quality information that is helpful to your business. If there are any topics you are interested in that we have not covered, please feel free to contact us and we would be happy to put together some information for you.

  10. Its such as you read my mind! You seem to grasp so much about this, like you wrote the book in it or something.
    I think that you can do with a few percent to power the message home a little bit, but other than that, this is wonderful blog.
    A great read. I will definitely be back.

Comments are closed.