We Are the Exclusive Dealer of the Barrel Blazer® Heating System
At SprayWorks, we design and manufacture 55-gallon drum heaters and other industrial drum warmers for your operations. SprayWorks is always looking for ways to improve cost and the way contractors manufacture and process spray foam and coating materials. The #1 most common tech calls in the fall, winter and spring seasons are a direct result of cold material. When your material gets cold it thickens in viscosity.
When contractors try to process cold material, this can create a domino effect – the transfer pump fails to deliver material to the machine when it needs it, the machine goes off ratio, pressure sensors shut down the machine, error codes appear, the spray gun crosses over, and the applicator has sprayed a bad shot of material. At this point nobody is working until all is corrected resulting in hours of lost time and money. Learn more about the Barrel Blazer.
Industrial Drum Warmer: The Barrel Blazer® from SprayWorks
There are many types of drum warmers and heat wrapping devices on the market to choose from, but none of them heat at the source in the drum where the problem starts. The Barrel Blazer safely heats your material at the bottom of the drum where the materials are being pumped from, making it the ideal drum warmer solution available.
Advantages of Our Industrial Drum Heaters
The units are also fully serviceable and available with heating element options giving you more choices for those products that require higher drum temperatures. The Barrel Blazer heating units are not just a one-trick pony; the units assist in securing your barrels and works with most any other drum heater transport system.
Offering upgradable units that give you more options for other products requiring higher drum temperatures. When other heat wrapping devices fail, contractors have no means of getting them repaired quickly and in most cases their only option is replacement.
Another added benefit when using our industrial drum heater Barrel Blazer heating system is that the heat rises from the bottom of the drum to the top, therefore slowly agitating the material as well. The Barrel Blazer heating system will start paying for itself right out of the box saving you not only in costly downtime but will help increase delta T’s performance and lessen the load on the primary heaters of the spray foam machine or polyurea machine you are using, not to mention resulting in higher yield gain saving you money in lost product.
Finally an industrial drum heater that is serviceable, dependable and works – the Barrel Blazer Spray Foam Material Warmer, exclusively from SprayWorks Equipment Group.
Check Out the Barrel Blazer Hot Plate Proof
Barrel Blazer® heats spray foam material by placing the drum onto a highly conductive drum size heating plate.
The Barrel Blazer Spray Foam Materials Heating System Gets You Ready to Work Faster!
- Efficient, consistent heating – up to 4 heaters on a 20 amp breaker
- Fully serviceable, durable non-corrosive aluminum design provides lasting performance
- Dual element heating for reliable, fast-warming when time is critical
- Modular or bolt down mounting – easily installed in-plant, on-the-job or in your mobile polyurea or spray foam rig
- Low profile for compatibility with existing drum racks
- Safely secure drums during transport with the optional Upright Attachment
- UL recognized and CSA certified components
Contact SprayWorks to Learn More About Our Industrial Drum Heaters
For more information about our industrial drum warmer and heater options, contact our team at SprayWorks today!