PMC Hydraulic Spray Foam Machines

High-Pressure Coatings and High-Pressure Spray Foam Machines

hydraulic spray foam machinesSprayWorks Equipment offers several hydraulic spray foam insulation machines to choose from, depending on the needs of your job. Hydraulic foam insulation machines are appropriate for a variety of jobs from residential construction to large commercial buildings, roofs, roads, bridges, and parking decks. Hydraulic proportioners have a longer life span than traditional electric spray insulation machines, lasting between 10 and 12 years on average, and even longer when properly cared for and maintained.

Learn About How Our Hydraulic Spray Machines Can Benefit You

Hydraulic foam machines have large pumps which cycle less frequently than other types of machines, meaning they don’t need to be replaced as often. Generally, these pumps last one to two years because the output per stroke ratio is much higher. The fluid-driven component of hydraulic machines makes these spray foam insulation rigs the most efficient in design and performance, as some proportioners can reach 3,500 psi.

hydraulic spray foam machinesDepending on the application, the heating system of hydraulic spray machines ranges between 10 and 20kW, which is essential for proper pumping and mixing of the spray foam. Like most proportioning machines, hydraulic rigs require an electrical connection to power the drive system.

Our Selection of Hydraulic Spray Foam Machines

Our hydraulic spray foam machines are manufactured by PMC and Gusmer, and we have a range of options for spray foam and other polyurea coatings and applications. Whether you need a single-phase or plural-component reactor, we’re here to help. Get the job done right with our line of hydraulic spray foam machines.

Note: Machines with an “X” are used for polyurea coatings, while the others are appropriate for spray foam.

Proportioner Foam Machine for Spray Foam

At SprayWorks Equipment, our spray foam machines are easy to operate and maintain and are built to last through tough conditions. Depending on your project demands, we have a variety of machines for you to choose from. From Gusmer to PMC, you can’t go wrong when you purchase hydraulic spray foam machines and more from us.

Below, you will find the machines we have available:

  • Gusmer GH-20/35 (hydraulic, 2,000 psi, 28 lbs./minute, maxhose length 320 ft., max fluid temp 190°F)
  • PMC PH2 (hydraulic, 2,000 psi, 28 lbs./min, hose length between 210 – 410 ft., fluid temp 190°F)
  • PMC PH25 (hydraulic, 2,000 psi, 30 lbs./min, hose length 310 ft., fluid temp. 190°F)
  • PMC PH40 (hydraulic, 2,000 psi, 40 lbs./min, hose length 410 ft., fluid temp. 190°F)

Proportioner Coatings Machine for Other Polyurea Applications

  • Gusmer GH-20/35 (hydraulic, 2,000 psi, 28 lbs./minute, maxhose length 320 ft., max fluid temp 190°F)
  • PMC PHX2 (hydraulic, 3,000 psi, 1.7 gal/min, hose length between 210 – 410 ft., fluid temp 190°F)
  • PMC PHX25 (hydraulic, 3,000 psi, 1.9 gal/min, hose length 310ft., fluid temp 190°F)
  • PMC PHX40 (hydraulic, 3,500 psi, 2.8 gal/min, hose length 410 ft., fluid temp 190°F)

Looking to learn the difference between a polyurea spray machine and a spray foam machine? Check out our comparison blog post!

Contact Us for High-Pressure Spray Foam Machines and Beyond

With our years of expertise and selection of machines available for different applications, we are happy to serve your spray foam and coating needs.

We are available to assist you with choosing the right proportioner for the job. Contact us today if you have any questions about our high-pressure spray foam machines and more.