A Full Line of Fluid Transfer Pumps, Drum Mixers, Agitators – Designed by Trusted Manufacturers
The fluid transfer pumps we carry are designed for use with polyurethane, epoxies and most industrial and commercial coatings. Built with a wetted and divorced fluid section to prevent crystallization from harsh chemicals, our fluid transfer pumps are designed to perform with industrial applications where durability, reliability and consistency of product delivery are essential. Choose from Graco Inc., Polyurethane Machinery Corporation (PMC), and International Pump Manufacturing (IPM) for a full line of fluid transfer pumps, mixers, and agitators.
Here at SprayWorks Equipment, through the reliable brands we offer our customers, we are sure you will find the best fluid transfer pumps for your needs to effectively get the job done.
Buy Now
| Typical Applications | Typical Fluids Handled |
|
|
T1, T2, T3 by Graco Inc.
Graco fluid transfer pumps are designed to work best with Graco Reactors. T1 is a 2:1 fluid transfer pump, T2 is 2.25:1, and T3 is a 3:1 fluid transfer pump. Depending on your output needs, Graco has a vast supply of pumps for any application. They are designed to be lightweight, long lasting, and low maintenance. The quick-release bung adapter makes it easy for drum removal without interference from hose connections.
Available Graco Fluid Transfer Pumps:
- Graco T3 Transfer Pump
- Graco T2 Transfer Pump
- Graco T1 Transfer Pump
Download Graco Transfer Pump Manuals
| Typical Applications | Typical Fluids Handled |
|
|
GHO by PMC
PMC custom manufactured stainless-steel fluid transfer pumps are used to pump your spray foam and coating chemicals from 55- or 30-gallon drums to the spray foam proportioning unit. Easy-to-rebuild air motors and fluid sections coupled with the stainless-steel construction will provide years of service with the proper maintenance. These units are manufactured in the USA.
The GHO 2:1 pump has been designed and built for the application of polyurea chemical systems, polyurethane foam chemical systems and some two-component epoxy systems. The transfer pump pumps both resin and isocyanate.
IPM manufactures a wide variety of pump variations and configurations, mixers, painting pumps, heated material supply hoses, and silica gel dryers, and SprayWorks Equipment carries them all.
| Typical Applications | Typical Fluids Handle |
|
|
IP-01 by IPM
- Pressure ratio 1:1
- Max output: 4 gpm (15 lpm)
- Available in both stubby and drum length
- Available in both stainless steel and carbon steel fluid sections
- Throat packing: Polyurethane
- Piston packing: UHMWPE
- Download the Manual
IP-02 by IPM
- New OP232CD designed for use in low-ceiling applications
- Swapping out 55 gallon drums in low-ceiling areas such as trailers are no longer a problem
- Reduced pump diameter allows heights as little as 78″
- Download the Manual
Drum Mixer #DM101 by IPM
Collapsing blades allow insertion through 2″ drum bung for those materials that separate, and stainless-steel lower components do an excellent job of getting the components back into suspension. Learn more about mixers.
5:1 and 10:1 Fluid Transfer Pumps by IPM
Buy NowContact Us for Fluid Transfer Pumps or Mixers from Graco, PMC and IPM
If you’re looking for reliable fluid transfer pumps that can really get the job done, SprayWorks has got you covered! Contact us online and one of our experts can suggest the best option for you.
