Spray Foam Machine Promo Extended

PMCs PH-20 Spray Foam Machine Promo Extended!

PMC has announced a deadline extension for the PH-20 Spray Foam Machine promotional offer until 3/29/13. New to the spray foam business and existing contractors have already taken advantage of huge saving with this exciting offer. Additional Bonus Items Included From SprayWorks Equipment Group.

PMCs PH-20 Hydraulic Spray Foam Machine

AP-2 Spray Gun

3/8’ X 50ft Heated Spray Hose with TC

1/4′ X 10ft Heated Whip Hose

2:1 Transfer Pumps with 3/4 X 15ft A & B Fluid Lines

Spare Mixing Chamber and Spray Tip

Complete O-Ring Rebuild Kit

Only $18,750.

Training Free!

Continue reading

New Spray Foam and Coating Machines from PMC

New-Spray-Foam-Machine-pmc

The new spray foam and coating machines from PMC.

The new PMC PA series was developed to provide the applicator with and economically priced machine that is user friendly, serviceable and designed to meet the modern day spray foam and fluid applied coatings requirements. The PMC PA series spray foam and coating machines will be available in two models. The PA-25-2000 and the PAX-25-3000.

The PA-25-2000 series spray foam machine is and air driven proportioner with and output of 25lbs/min and capable of up to 2,000PSI.

The PA-25-3000 series coating machine is and air driven proportioner with and output of 1.3 gal/min and capable of up to 3,000PSI.

The machine’s features a 7″ air motor , 7,500 watt heaters with the option of larger heaters. Weighing only 265lbs the PA series open frame design allows easy access to all of the major components. The PA and PAX machine’s also features state of the art reversing valve reversing the pump direction with out the need for electricity!

Continue reading

Tracking your money in yield

Tracking product yield is an important part of our day to day operation. If you have purchased or going to be purchasing a mobile spray foam rig or spray foam equipment tracking your money in yield will help fine tune your operational cost and aid in the return of your investment.

Tracking tells us how and if the yield of the product is or is not being installed and/or estimated correctly or if the materials used are inconsistent with expected yield. In the warmer months we can see what yields are achieved in comparison to the colder seasons for losses.

We can compare the yields gained when pre warming the drums. We can see if the applicator is consistent and productive with the application. The crew can also make sure they don’t run out of product, thus requiring costly cleanup, re-purging the spray foam machine and hoses as well as the likelihood of having to rebuild the spray gun.

In addition we can compare how hard the drive systems of different spray machines have to work when processing the products. It’s not difficult to track when using the stroke/cycle counters.

Machine Approximate Output per Cycle
(A+B)
Stroke/Cycle
Per Gallon
GH-25 240 cc 16
GH-40 160 cc 24
E-20 Reactor 0.0104 gallon 96
E-30 Reactor 0.0272 gallon 37
FF 1600 120 cc 32

Continue reading

Opportunities owning a spray foam business

The insulating of homes and buildings has been a primary source of income for many spray foam contractors. The tremendous versatility of sprayed in place rigid polyurethane foam opens numerous opportunities owning a spray foam business for use in other areas other than new homes and buildings.

The ability of spray foams to provide superior insulation properties is not the only feature of the product.  The cured foam adds structural strength; it is an effective sealer of cracks and holes, has good floatation and sound dampening characteristics, provides vapor drive reduction, expands into hard to fill areas, the application is fast, reduces the effects of thermal shock, bonds between various construction materials and does not lose the physical properties or insulation capability over time.

The ability of the contractors to take their mobile spray rigs to a job site and spray easily to irregular surfaces or odd shaped objects is a tremendous advantage of spray-in-place polyurethane foam over all other conventional insulations systems.

Continue reading

Running a professional and successful Spray Foam Business?

How many times has the crew showed up for work, got into the vehicle, turn the key on and drive off to the Job with your new spray foam rig and then you receive that dreaded phone call, the machine or equipment is not working, “it was working yesterday” or “we need more parts” and can’t work today. (Sound familiar?).

When running a professional and successful spray foam business implementing some standard procedures and guide lines will help minimize down time and help transform your crew into a professional spray foam production team. The first thing that is vital to your operation is that you and your crew have received the proper training with a clear understanding of how your spray equipment works including: Safe handling of materials, proper preventive maintenance, parts management, trouble shooting skills, and spray application techniques.

In addition the Spray mechanic has to be aware of three basic things. The proper procedure in handling a spray application project. What the foam should look like as its being applied. What to do if there is a problem with the equipment or on the job and be capable of correcting this problem. SprayWorks Equipment Group has compiled some basic daily, weekly and monthly Key check points that will help guide you along the way.

Continue reading