SprayWorks Equipment Group is proud to announce our new 20 foot Roofing Rig. This low-cost rig is a solution for large-scale projects requiring high-output plural component machines without a high-cost rig. At 20 feet, it becomes easy to transport to your job site. Many commercially designed rigs are longer and require heavier tongue weight.
Continue reading
It resembles a Mars Rover Robot, except that a spray gun is mounted on this motorized mobile spray machine. Introducing the latest innovation in spray coating equipment: The Spraybot, from Sprayworks Equipment Group.
Jim Davidson, President of Sprayworks Equipment Group, LLC in Canton, Ohio has invented a new automated spray application machine that has been patented as the Spraybot. This roving machine is designed to evenly apply spray foam, polyurea, or other coating materials to roofs, bridges, decks, and other large horizontal surfaces. Interestingly enough, automated spray machines are finding a place in floor-coating industries that require the application of elastomers, polyureas, epoxy, and other types of coating materials.
Now is the time to save! If you’re looking to upgrade your existing spray foam machine and or looking to expand your spray foam business. Purchase a PMC GH-40 PN# GH 40P-1210A30 from SprayWorks Equipment Group for only $18,500.00 offer expires 12-31-13.
The PMC GH-40 is designed to accommodate up to 410ft of heated spray hose and features two independent pre-heaters, providing you with precision control. The user friendly control panel makes it easy to adjust temperatures and pressures. The GH-40 now features a stroke down cycle counter. The counter can be pre-set to prevent you from running out of material. This alone can prevent costly down time at the same time saving you money in labor monitoring barrel levels. “Designed with the customer in-mind”
SprayWorks Equipment Group announces, the Blazer TC, an optional and programmable temperature controller for the Barrel Blazer Drum Heater system!
The optional Blazer TC controllor will allow new and existing customers to fine tune the viscosity of materials being manufactured and have a digital read out as well. The Blazer TC plugs directly into the Barrel Blazer Drum Heater unit and comes with an easy to install wall mount din rail.
The Barrel TC can be pre-programed to regulate minimum and maximum temperatures. Using this feature will decrease energy consumption.
When utilized as a troubleshooting tool, it gives you an immediate answer to the #1 spray foam equipment tech call question in cold weather applications, “what is you drum temperature”?
In addition the Blazer TC solves problems with other heat wrap type devices.
When recirculating materials, the controllor can be used to monitor drum temperatures.
SprayWorks Equipment Group is well known for bringing quality products at affordable pricing to the spray foam industry, from mobile spray foam rigs, barrel blazer drum heaters, the SprayBot and PMC spray foam equipment, just to name a few.
SprayWorks introduces a high performance Spray Foam Mechanic Overspray Release agent that is a clear spray-on silicone mold release and lubricant combined. SprayWorks Spray Foam Mechanic Overspray Release is designed specifically for use on spray foam insulation equipment, like lends covers, mask, spray guns, machines and hoses, making foam removal a snap.
Spray Foam Mechanic Overspray Release is also a lubricant; lubricate internal and external components on and in your spray guns. Use SprayWorks Spray Foam Mechanic Overspray Release when rebuilding spray foam equipment, pre lubricating piston shafts and seals before reassembly. Apply Spray Foam Mechanic Overspray Release to piston shafts before, during and after usage to further extend the life of seals.
Pre-lubricate gun parts, O-Rings and much more……
Another spray foam rig from SprayWorks Equipment Group exceeds customers expectations.
Testimonial:
We received our spray rig today, I must say Sprayworks not only met our expectations but surpassed them by a long shot. The attention to detail is phenomenal, the layout is all business and well thought out.
I would definitely recommend sprayworks rigs to any company from established companies to new up incoming alike.
The sales staff is great to deal with and knowledgeable.
Thanks again
Don Fraser
Project Manager
M&L General Contracting LTD
See more spray foam equipment and spray rigs from SprayWorks Equipment Group:
Save on spray foam equipment and polyurea heated spray hoses from PMC.
Maintain efficient heating from your spray foam equipment and polyurea spray equipment to your spray gun with PMC heated hoses and save!
Featuring a PVC protective extruded jacket and a copper weave element to provide full hose circumference coverage and backed with a 1 year manufacturer’s warranty. Choose from 2,000 psi to 3,500psi with or without thermocouple wire.
The M 16 Series are the new benchmark for mobile spray foam rigs anywhere. SprayWorks spare’s no effort to provide you with the utmost in functionality and performance. SprayWorks Equipment Groups M 16 Series Mobile Spray Rigs are designed for budget conscious contractors who do not necessarily need a high end rig.
