Sometimes, there are things you just learn over time. Our team of experts have shared some of the trade secrets they have learned through successes and failures.
Jim Davidson
Jim Davidson is the Managing Partner at SprayWorks Equipment Group. He has 50 years of experience in the spray foam industry and has worked alongside many of the industry pioneers. Jim has designed and created industry equipment such as; Spraybot, Barrel Blazer, Roboliner and Polybot - among others.
John Davidson
John Davidson is the VP of Operations at SprayWorks Equipment Group and is an SPFA PCP Certified Roofing and Insulation Installer, Roofing and Insulation Project Manager, and Supplier Rep. With over 30 years of experience in the spray foam and polyurea industry, John brings a wealth of knowledge and hands-on experience. He has worked on commercial and residential buildings, bridges and infrastructure.
Dave Penta
Dave Penta is the VP of Sales at SprayWorks Equipment Group. For the past 30+ years, Dave has worked with multiple industries including; commercial and residential buildings, along with spray foam and coatings systems.
SPRAY GUNS
Nothing Found
It seems we can’t find what you’re looking for. Perhaps searching can help.
HOSES
Weather Conditions
As seasons begin to change, it’s easy to overlook the still-frigid-nights with the sunny days. Temperatures fluctuate from day to night, even in the spring and summer, so I recommend keeping your material stored and warm overnight. Don’t let the sun fool you!
Test Your Side Seals and O-Rings for Proper Seating
After replacing the o-rings in your AP-2 Gun, it’s important to make sure they are sealing properly. In order to test if the side seals are seating properly and the o-ring is sealing, follow these steps:
With the safety on and the gun disconnected from the hose, hook an air hose onto the gun and pull on the trigger. This pulls the chamber back slightly which cuts the airflow coming out of the tip. The air should cease from blowing out of the tip and should only slightly exhaust at the vent near the handle and the air-motor. If the side seal, the o-ring around the side seal or the oring at the screen screw is not sealing the air will push out of the check valve seat.
Continue reading→
TRANSFER PUMPS
Nothing Found
It seems we can’t find what you’re looking for. Perhaps searching can help.
SCREENS & FILTERS
Nothing Found
It seems we can’t find what you’re looking for. Perhaps searching can help.
WEATHER
Nothing Found
It seems we can’t find what you’re looking for. Perhaps searching can help.
PROCESS & DOCUMENTATION
Nothing Found
It seems we can’t find what you’re looking for. Perhaps searching can help.
