If you store a spray foam product, it must be maintained at specific temperatures to maintain its optimal state (or be usable at all). As a result, you’ve likely looked into methods of temperature regulation. Chemicals stored during fluctuating ambient temperatures can experience adverse property transformations not ideal for their uses. While the temperature may not feel cold to people, for particular products, dramatic exposure to changes in environmental temperatures are slow to change even one degree of temperature inside the stored containers.
Continue readingTag Archives: Spray Foam Equipment
Changing Hydraulic Oil in your Spray Foam Machine
What you need to know before changing hydraulic oil is when operating in ambient temperature recommendations of 0 to 90°F (-17 to 32°C) frequency is about 1000 hours or 12 months, whichever comes first and/or in 90°F and above (32°C and above) 500 hours or 6 months, whichever comes first.
Recommended Oils:
Citgo A/W ISO Grade 46 Amsoil AWI ISO Grade 46 (synthetic*) BP Oil International Energol® HLP-HM, ISO Grade 46 Carl Bechem GmbH Staroil HVI 46 Castrol Hyspin AWS 46 Chevron Rykon® AW, ISO 46 Exxon Humble Hydraulic H, ISO Grade 46 Mobil Mobil DTE 25, ISO Grade 46 Shell Shell Tellus, ISO Grade 46 Texaco Texaco AW Hydraulic, ISO Grade 46 *
NOTE: After changing hydraulic oil and upon starting motor, hydraulic pumps may make a screeching noise until primed. If this noise continues for more than 30 seconds, switch off motor control and contact your machine manufacturer.
Spray Foam Equipment Thermal Expansion Hazard
Fluids subjected to heat in confined spaces, including hoses, can create a rapid rise in pressure due to the thermal expansion. Over-pressurization can result in equipment rupture and serious injury.
What type of foam insulation spray equipment should I get?
When operating or are initiating a foam insulation business, you are aware of the practical, versatile, and lucrative nature of the insulation market. However, as with most booming industries, there are a variety of uses for spray foam insulation spanning a range of applications. In an increasingly ‘green’ initiative-minded world, insulation helps lower energy consumption and assists in keeping often unfriendly weather outside where it belongs.
Continue readingFactor’s Impacting a Building’s Energy Consumption
How spray foam insulation prevents energy loss
There are many factors which determine how much energy a modern building is required to operate efficiently. In this article, we explore where energy loss is happening. We also explore how to prevent energy loss with spray foam by using foam insulation spray equipment.
Continue readingSprayWorks Teams Up with Graco to Offer Equipment, Rigs, and Parts
Now Offering Graco Products
SprayWorks Equipment Group is proud to announce its recent partnership with Graco Inc. Now a distributor for Graco pumps, mixers, guns, parts and Gusmer Reactors – customers have a complete line of products to choose from. The partnership was formed in order to fulfill customer needs and offer lower cost rigs with some of the highest quality equipment in the industry.
Continue reading
How to Easily Adjust the Output on Your Fusion Gun
Take your Machine from Zero to Full Flow
The AP Fusion Variable Flow Cap is designed to allow you to change the output of your Graco Fusion AP gun without having to change the mix chamber. The AP Fusion Adjustable Flow Cap Kit is the newest addition to the Graco Fusion AP spray gun. Preventing the applicator from having to purchase and replace multiple chamber sizes in order to achieve variable flow patterns, this gun make material flow a breeze.
Continue reading
How Does the Logan Manifold Work
How to Changeover Material Using the Logan Manifold
Below are instructions on how to changeover material from Open Cell (OC) to Closed Cell (CC) or from Closed Cell to Open Cell, using the Logan Manifold. Changeover only takes about 10 minutes, once the Logan Manifold is set up, and material waste is minimal at only eight ounces.
Continue reading
How to Minimize SPF Material Waste
Spray polyurethane foam material is one of the ongoing expenses you’ll have as an equipment and business owner. That means it’s one of the biggest areas in your business that you can cut costs by reducing waste when storing or spraying SPF material. Use the following four tips to effectively minimize SPF material waste in your spray foam insulation business.
Continue reading
How to Select a Polyurethane Spray Gun
Spray polyurethane foam is an essential component used by the manufacturing and construction industries. The key to multi-tasking, spray foam is used as insulation across a variety of applications, including walls, roofs, and ceilings, and is even used in industrial settings between pipe fittings or in climate controlled environments. The spray foam formula can be altered to suit different uses, depending on the needs of the application.
Continue reading